Home > Blister Pack > Machine for blisterpacks BPC25N / BPC35N

MACHINE FOR BLISTERPACKS:
BPC25N / BPC35N

Fully automatic process machines, designed for high throughputs in continuos mode.

Operation

The plastic film is unwound from the reel and warmed up in the heating module; when the preset process temperatura has been reached, the film is driven into the moulding zone (positive or negative, depending on the item features) where the blister is formed.

After moulding the film goes into the filling area, where the blisters are filled with the relevant items, then sealed either with cardboard or with plastic. The filled blisters follow to the punching and die cutting stations, where they are split from the film and, thereafter, ready for collection. The film waste is rewound again for an easy handling.

The main characteristic of the BPCN models is the automatic positioning station, motorised in the process stations of each stage.



Features

  • Robust construction, totally modular, for an easy adaptation to different production requirements and conditions.
  • Ergonomic structure which allows easy operation in web loading, filling, controlling, etc.
  • Quick and easy access to the tooling, thus minimizing changeover.
  • Operation control of all working parameters by means of PLC.
  • Internal communication by high speed Ethernet network.
  • Storage of pressure data for quick automatic settings.
  • Powered storable dimensional settings.
  • User friendly touch screen interface.
  • P.I.D. temperature control, for ultra fast and accurate settings.
  • Simple and fast maintenance jobs.
  • Same station accepts heat or High Frequency sealing (as an option).
  • On-line checking by in-built modem (optional).

Technical specifications

Features BPC25N BPC35N
Max. diametre of thermoforming web (a) 500 mm
Max. optional diametre of thermoforming web (b)   800 mm
Max. diametre of sealing web 400 mm
Max. width of thermoforming sheet 390 mm 540 mm
Max. width of sealing sheet 360 mm 510 mm
Max. thickness of thermoforming sheet (a) 0.5 mm
Max. thickness of thermoforming sheet (b)   1 mm
Max. thermoforming area 250 x 350 mm 350 x 500 mm
Min. thermoforming area 100 x 230 mm 100 x 300 mm
Max. thermoforming depth 80 mm
Vacuum pump flow 21 m3/h 40 m3/h
Installed heating power 9,2 kW (750 mm) 17.2 kW (1000 mm)
High Frequency installed power (option) 7-10 kW
Total installed power (without H.F.) 21.72 kW 32.22 kW
Die-cutting max. force 7.5 Tm 12 Tm
Dry cycle output (1) 30 cycles/min
Compressed air working pressure 6 bar
Compressed air consumption at 30 cycles/min (2) 102 m3/h 150 m3/h
Colour RAL 9002
Mains power 400V+T+N, 50 Hz

(1)(2) These figures refer to dry cycle operation and will differ under actual working conditions, depending on the plastic material and process patterns. We will gladly advise on your specific requirements upon request.

 

Dimensions and weight

  BPC25N BPC35N
Height 1.800 mm
Width 1.120 mm 1.320 mm
Length (including filling zone: 3.500 mm) 9.860 mm 10.660 mm
Filing zone height 950 mm
Approximate weight 2.500 kg 3.500 kg

 

Optional devices

  • Aditional pressure molding station.
  • Punching station.
  • Automatic feeding of inner cards.
  • On-line checking by in-built modem.
  • Expandible filling zone.
  • Automatic product feeding and handling.
  • Pre-printed sealing film. 
  • Functional ancillary equipment: chillers, compressors, dryers...
  • Identifying ancillary equipment: markers, coders, labelers... 
  • Twin bubble blister, automatic or semiautomatic.
  • Specific customizations: power, dimensions, patterns, etc.

Sheet machine in PDF

Download the sheet machine in PDF