MACHINES FOR FILM THERMOFORMING:
FV 35 / TVP35
Fully automatic machines for vacuum film thermoforming, designed for high throughputs in continuous mode for small sized items.
Operation
The plastic film is unwound from the reel and warmed up in the heating module; when the preset process temperature has been reached, the film is driven into the moulding zone (positive or negative, depending on the item features) where the ishape is formed, by means of vacuum.
After moulding the film goes into the die cutting station, where the shaped item is split from the film and, thereafter, follows to the piling station, ready for collection. . The film waste is rewound again for an easy handling.
Features
- High speed mould/countermould ascent and descent.
- Neumatic die-cutting by double action, high precision toggle.
- Operation control of all working parameters by means of PLC.
- User friendly, sliding touch screen interface.
- Internal high speed communication Ethernet network.
- Sturdy and accessible frame which allows for easy and simple maintenance jobs.
- Differencial heating system, by means of moving louvers (patented).
- All sorts of thermoplastics acceptable (PVC, PET, PS, etc).
- Ergonomic design, to minimize operator stress.
Technical specifications
| Features | FV35 | TVP35 |
| Max. web diameter (a) | 500 mm | |
| Max. web diameter, optional (b) | 800 mm | |
| Max. sheet width | 540 mm | |
| Max. sheet thickness (a) | 0,5mm (reel holder 500 mm Ø) | 0,5mm (reel holder |
| Max. sheet thickness (b) | 1 mm (reel holder 800 mm Ø) | |
| Max. thermoforming area | 350x500 mm | |
| Min. thermoforming area | 200x300 mm | |
| Max. thermoforming depth upwards/downwards | 70/80 mm | |
| Vacuum pump flow | 40 m3/h | |
| Heater installed power | 17,2 kw (1.000 mm) | |
| Total installed power | 26.24 kw | 26.79 kw |
| Max. die-cutting force | 20 Tm | |
| Dry cycle output (1) | 30 cycles/min | |
| Thermoforming plates drive | Pneumatic | Pneumatic/toggle |
| Die-cutting plates drive | Pneumatic/toggle | |
| Colour | RAL 9002 | |
| Mains power | 400V + N + T, 50 Hz | |
(1) These figures refer to dry cycle operation and will differ under actual working conditions, depending on the plastic material and process patterns. We will gladly advise on your specific requirements upon request. |
||
Dimensions and weight
| FV35 | TVP35 | |
| Height | 1.900 mm | |
| Frame widht | 1.320 mm | |
| Length | 6.960 mm | |
| Approx. weight | 3.000 kg | |
Optional devices
- Film edges heaters.
- Punching station.
- Automatic modules positioning.
- End-of-line automation
- On-line checking by modem.
- Functional ancillary equipment: chillers, compressors, dryers...
- Identifying ancillary equipment: markers, coders, labelers,...
Sheet machine in PDF
Download the sheet machine in PDF